Announcing our November 2014 Workbench of the Month

Our November 2014 Workbench of the Month comes to us from Ron from Sugar Grove, Illinois.  Ron has constructed an amazing hard maple modern split top bench that has both a leg and wagon vise.  This is sure to provide him with countless years of use and enjoyment. We know you are all going to appreciate the true craftsmanship demonstrated in this fine workbench.  Tremendous job Ron.

Leg Vise, Wagon Vise, Split Top Workbench, Lake Erie Toolworks

Leg Vise, Wagon Vise, Split Top Workbench, Lake Erie Toolworks

Leg Vise, Wagon Vise, Split Top Workbench, Lake Erie Toolworks

Leg Vise, Wagon Vise, Split Top Workbench, Lake Erie Toolworks

Leg Vise, Wagon Vise, Split Top Workbench, Lake Erie Toolworks

Leg Vise, Wagon Vise, Split Top Workbench, Lake Erie ToolworksLeg Vise, Wagon Vise, Split Top Workbench, Lake Erie Toolworks

Leg Vise, Wagon Vise, Split Top Workbench, Lake Erie Toolworks

Leg Vise, Wagon Vise, Split Top Workbench, Lake Erie Toolworks

Leg Vise, Wagon Vise, Split Top Workbench, Lake Erie Toolworks

Leg Vise, Wagon Vise, Split Top Workbench, Lake Erie Toolworks

I am sending you some photos of the workbench I recently finished. I purchased the Wagon vise kit and a basic vise screw and nut from you last fall and have incorporated them building this bench.

The bench is a Robert Lang bench design published in the October 2008 Popular Woodworking Magazine. The unique construction features of this bench made it an attractive alternative for my shop should I relocate my shop in the future. Although it is a heavy bench weighing close to 400 pounds, it can be completely disassembled and ready to move in about 30 minutes. A number of “old world” design features make this bench a lot of fun to build without being too complicated for a novice builder.

Though expensive, I used hard maple. It was readily available in a good variety of rough sizes. Hard maple is great to work with and is easy to cut if you have sharp blades. And, it helps to have a good 12-inch jointer and planer to handle the big pieces. This design requires quite a bit of hand cutting, the tendons, dovetails, and ends. I really like my big, sharp tendon saw from Bad Axe Saws. Numbering or coding of each piece is mandatory as many of the pieces look alike but only fit one place.

Another good feature of the bench design was the ability to easily modify the dimensions. My workshop would not support as long of a bench as Lang’s creation. So I shortened my bench a bit and, of course, installed the Lake Erie traditional wood screw wagon vice and a Roubo style leg vise. Although quite a bit of work to install, the vises not only look nice but also are operationally smooth and solid.

Lang’s design also incorporated some tool and bench trays between the two workbench tops. Having changed dimensions, I simply made a long tool holder that can be removed for center table clamping or layout. As a last step, I simply coated it with Danish Oil and began using it immediately.

Thank you for your assistance in ordering the parts I needed, and, for the precision of your product. The quality is outstanding.

Sincerely.
Ron W. – Sugar Grove, Illinois

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s