Announcing the Lake Erie Toolworks – 2X Wood Vise – Fastest Threaded Workbench Vise On the Planet!

If you’ve been pondering the idea of building your dream workbench but just haven’t been able to settle on the proper vise to use, we have your answer.  Announcing the new Lake Erie Toolworks – 2X Wood Vise – Which happens to be not only the largest wooden production vise on the market, but is also the fastest threaded workbench vise on the planet – be it metal or wooden.

This brand new vise is powered by a massive 3″ diameter screw that has a 1 TPI (1 Turn per Inch) double start thread.  The vise action can also best be described as “smooth as butter”.  This makes for a simply amazing and game-changing workbench vise to help you craft your woodworking projects in record time.

We’ve been building and testing out prototypes of the 2X Wood Vise for quite some time but we’ve always had a challenge in finding a lumber supplier that could provide a stable supply of the huge billets of hard maple.  It must be all that clean living we do, but we’ve finally lined up a reliable source.

Lake Erie Toolworks is now announcing a pre-order special via our website on the 2X Wood Vise if you place your order by July 31, 2018 at 12 PM EDT.

So if you’ve been dreaming of the perfect vise – now’s your chance to jump in, because the water is FINE!

Lake Erie Toolworks, 2X Wood Vise, Wooden Vise, Leg Vise



Here’s an “English Workbench” Idea – June 2018

Here’s another Workbench Idea from Lake Erie Toolworks for you to consider and possibly build.  This English Style Workbench comes to us from Alex W. from West Kilbride in the United Kingdom.

Alex got his design ideas from a mixture of famed Workbench builders Richard Maguire and from Christopher Schwarz.  From these legendary influences, Alex crafted a phenomenal English style Workbench that will provide him with countless years of functional enjoyment.  We trust that you’ll all enjoy this latest workbench idea.

Lake Erie Toolworks, English Workbench, Wood Vise, Wood Vice, Leg Vise, Leg Vice






“English” Workbench

I built this workbench using the design from Richard Maguire’s English Workbench videos and plans as the starting point (  Christopher Schwarz has a similar design in The Workbench Design Book but with angled legs and I liked the look of that in giving added solidity so I adapted Richard’s design and changing his face vice to a leg vice.

The leg vice components are clearly from Lake Erie and very impressive pieces of kit they are!  I had some problems with the first screw/nut as the humidity in Scotland caused uneven swelling so that the screw was binding irretrievably.  Nick generously made me a new nut with wider tolerances and that works like a dream.

(Lake Erie Toolworks Comment:  To date, we’ve had approximately 1/3 of 1% of our many wooden vise screws that have gone out to customers have some form of humidity related binding challenge. Rest assured that in the very rare instance you might encounter a binding screw, just let us know about it and we’ll make it right – Just like with Alex featured here.)

The bench top, aprons and leg vice are rock maple the top is 65mm thick and the aprons are 50mm.  The leg trestles are agba.  In retrospect, the bench would have been heavy and robust enough in agba and it would have been significantly easier to work.  The comparison is that planing agba is like taking a hot knife to butter and planning the maple is like attacking concrete with a paint scraper.

Everything is held together with tapered wooden nails and they worked really well once I’d got the idea of allowing the drill to cool down every 5 or so holes.  The bench is finished with Danish Oil – this hasn’t changed the colour much but should protect the wood from some of the bumps and scrapes.

The bench is 2.25 m long, 0.79 m wide and 0.88 m tall.  To give an idea of scale, the plane on the bench is a Stanley 5½. I like the slightly taller bench and intend to add a Moxon vice using the offcuts and spare wood from the bench components.  I’ve no idea what the weight is but it’s very substantial – this bench isn’t going to move!

Alex W. – West Kilbride – United Kingdom

Here’s Another Great Workbench Idea – May 2018

Our latest Lake Erie Toolworks Worbench Idea comes to us from Michael H. who hails from the town of Westford in the Green Mountain State of Vermont.  Michael has built a multi-functional dream of a workbench that serves as a workbench, router table, saw out-feed table, layout, assembly and edge joining table. Now try saying that again three times real fast.  She’s a beauty and we know you’ll all appreciate this latest Workbench Idea.

Lake Erie Toolworks, Roubo Workbench, Leg Vise, Leg Vice, Wood Vise, Wood Vice, Vise, Vice

Lake Erie Toolworks, Roubo Workbench, Leg Vise, Leg Vice, Wood Vise, Wood Vice, Vise, Vice

Lake Erie Toolworks, Roubo Workbench, Leg Vise, Leg Vice, Wood Vise, Wood Vice, Vise, Vice

Lake Erie Toolworks, Roubo Workbench, Leg Vise, Leg Vice, Wood Vise, Wood Vice, Vise, Vice

Lake Erie Toolworks, Roubo Workbench, Leg Vise, Leg Vice, Wood Vise, Wood Vice, Vise, Vice

This project started with the purchase of a new SawStop Table saw and when I discovered my very old outfeed table was the wrong height and the miter guides were the wrong width.  I wanted something much sturdier than my old table; I wanted to make better use of the space beneath the table (cabinet to follow), and I wanted a leg vice to compliment the shoulder and end vice on my 35+ year old (and also needing to be replaced) workbench.

A lot of my work is frame and panel so I am often ripping rails & stiles and wanting to re-joint between passes on the table saw.  I reasoned that I could throw a board into a leg vice and run a jack plane over it faster than I could go to the dust collector, open and close blast gates, go to the jointer, run the piece and then retrace my steps.

So, I thought, while I’m at it why not build in a new, more versatile, better dust collecting router set up.  So now I have this bench – an outfeed table, an assembly table, and edge jointing table, and super-duper router set-up. The design started with the Benchcraftted Classic bench design.  I made it 4” wider, spread the legs to accommodate the router and eventual storage cabinet.  Then I added a bridge piece between the bench and the saw to span across the bottom dust collection hose and give myself 48” behind the saw blade.

The bench is made almost entirely from 8/4 poplar.  After I got the top together I discovered I had managed to turn the thing around and had framed in the router opening on the wrong end (mistake #1), so I ripped it apart and re-glued it, but in my haste lost control of the process and had no way to flatten it (mistake #2) so I ripped it apart and re-glued it, again.  Three times a charm, except then it wasn’t as wide as I wanted and I was out of poplar.  I found a piece of cherry that had been living in my shop for a long, long time and it became eye candy trim.  The bench plans called for cutting the mortises in the top and then fitting the base to it.   This required getting all 12 mortise & tenon joints in three dimensions all to come together at once.  I was amazed when it happened!  In a do over I’d build the base and then transfer markings to the top.  I also took the directions to make the holes in the leg & chop 2 9/16″ too literally.  This left only 1/32” of clearance on the radius and made the installation quite demanding.  In a do over I’d go to 2 3/4.  I haven’t yet figured out where I want the holes in the deadman, so haven’t drilled them.

Unlike a “real” work bench I wanted this to be slippery, so I finished it with three coats of good tung oil and then waxed it.  I only leather lined the chop, not the leg.  The casters are from Woodcraft and settle onto a firm base. They provide leveling and easily screw up to a wheel when movement is necessary.

Thanks for reading.  Michael H. – Westford, VT